1.機台規格及限制
機型：Formlabs Form 2
切片軟體：PreForm
列印材料：標準樹酯（白/透明）
最大列印範圍：145 * 145 * 175 mm
2.借用資格及方法
需先連絡創創工坊，並由工坊安排時間向助教學習操作後，才有借用資格。
欲使用設備請於三個工作日前繳交設備借用申請單至【科一館121室創創辦公室】或是傳送電子檔至【創創工坊臉書粉專】(回覆時間：平日9:00-12:00/13:30-16:30)，收到創創工坊審核通過確認以後，請聯絡助教預約借用時間。
፠FB社團【數位製造機具工坊】有助教的聯絡方式與申請單
3.使用規則
- 非學術(泛指教學與研究)用途單人單月配額最大用料上限為50ml
- 操作機台一律需要助教在旁監督
- 使用前請檢查料槽內是否有異物
- 操作設備時請佩戴手套口罩
- 開放使用時間(包含列印與後處理)為工作日的早上10點到晚上10點(不可放置過夜)
- 如有任何問題，助教可隨時停止列印
借用時請注意素質，不要造成下一位使用者的不便
如有違規者，取消借用權限1~2個月
ICT SLA Printer FAQ
1.Printer′s Specification
Machine：Formlabs Form 2 3D Printer
Slicing software: Preform
Material: Standard Resin (White/Clear)
Maximum working area: 145 * 145 * 175 mm
2.How can I use the machine?
Contact ICT first, and the staff will arrange the training with TA.
Please hand in the Equipment application form 3 Working Days before use (Do not apply online) to 【SA121】or email it to 【ICT facebook fanpage】(Response time: Weekdays 9:00-12:00 / 13:30-16:30). Equipment is only allowed to be used during weekdays. After approval, you can contact the TA to make a reservation (Do not come over by yourself). When you come, please remember to bring the name tag.
፠The equipment application form and TA′s information can be found in the FB group【數位製造機具工坊】
3.Operation regulations
- Quota: maximum use of 50ml for each person per month (only for teaching and research purpose, not for personal use)
- Operation must be under TA′s supervision.
- Check if there is any foreign material in the tank before operation.
- Please wear gloves and a mask during operation.
- Operation time(Building and post-processing) is only allowed from 10 AM~10 PM (12-hour continuous printing at most and overnight printing is not allowed).
- TA has the right to terminate the operation if any problems occur.