選課日期:111/7/25截止
課程名稱
智慧醫療與光電實作
授課教師
生醫光電所 賈世璿 教授
生醫光電所 郭文娟 教授
生醫光電所 吳育德 教授
生醫光電所 高甫仁 教授
生醫光電所 薛特 教授
生醫光電所 陳奕帆 教授
生醫光電所 詹明哲 教授
課程概述與目標
- Students will learn the fundamentals of Biophotonics from experiments and see its capability, and be aware of the basics of lab safety.
- This course will provide hands-on experiences about the diversity of Biophotonics and smart medicine.
課程日期
8/1 (一)~ 8/29 (一)
每週一 13:20-17:20
課程總時數
23小時
上課地點
傳統醫學大樓甲棟 645
修課人數上限
24人
先修科目或先備能力
普通物理及基礎程式之相關知識或能力
學生自備物品
無
作業、考試、評量
實作報告 50% 、課堂表現 20% 、期末筆試 30%
課程大綱
單元主題 | 內容綱要 | 講授 | 示範 | 習作 | 其他 |
UV-VIS Spectroscopy | Measure optical absorption/transmission in solids/liquids | 1hr | 4hr | ||
Michelson interferometry | Students will learn how to setup an interferometer with coherence and low coherence light source and how to adjust fringe’s pattern | 1hr | 4hr | ||
Fundamental of optoelectronics | 1. Learning the conversion from electric current to coherent light radiation by aligning a fiber laser. 2. Learning light detection using a photodiode and electronic components. | 1hr | 4hr | ||
CMOS & Imaging | Understanding the use of CMOS sensors in electronics imaging and the integration with notebook, pad, and smart phone | 1hr | 4hr | ||
Particle size analyzer and thermal evaporator | 1. To measure the sizes of particles using the particle size analyzer. 2. To learn how to operate the thermal evaporator to deposit thin films 3. To fabricate plasmonic substrates using microsphere lithography. | 1hr | 4hr | ||
Introduction and application of artificial neural network | 1. Learn the basic principles of neural network operation. 2. Understand the training process of neural networks. 3. Observe the effect of different training conditions on neural networks. 4. Learn how to use Google Colab and compile Python code. | 1hr | 4hr | ||
Introduction to optical elements | Introduction to commonly used optical components and their uses. | 3hr |
課程進度表
日期 | 課程進度、內容、主題 | |
8/1 | Introduction to optical elements | |
8/8 | 實驗六選四 | |
8/15 | 實驗六選四 | |
8/22 | 實驗六選四 | |
8/29 | 實驗六選四 |
課程教材
微學分課程Q&A
📌 我想修微學分課程,該如何報名/進行選課?
每門課程將於開課前三週至前一週間開放選課,請同學於選課截止日前至ICT選課系統進行報名。
📌 我是校外學生,請問可以選課嗎?
校外學生請點擊ICT選課系統頁面右上角【非本校學生申請賬號】,完成註冊後可以進入系統選課。若該課程不開放給校外學生選課,則無法進行報名。
📌 如何得知是否選上了該課程?
請於選課截止的隔日至選課系統查詢選課結果。若中選成功,請於3日內至E3平台查詢是否有無出現該門課程名稱。
📌 我已經選了課程,該如何退選?
若是選課報名還沒有截止,可直接在ICT選課系統上點擊【取消報名】。若是報名已經截止,請寄信給助理corlyn@nycu.edu.tw 告知退選意願。若是已經開始上課的課程,請寫信給授課教師,經老師同意後,截圖/轉寄信件內容給助理。
📌 若沒有退選/無故缺席課程會如何?
未依規定辦理課程退選或無故未到課,將取消該同學兩月內之ICT選課權益,即2個月內無法報名選課系統上的任何課程。
📌 我是碩士/博士生,可以報名選修微學分課程嗎?
可以。惟請留意該學分是否認計為畢業學分,將由您的系所決定。為避免學分爭議,請於抵免前詢問系所該門課的學分是否可以認計。
📌 修微學分課程需要繳學分費嗎?
不需要。
📌 課程會有成績嗎?
微學分的修課方式比照一般課程,必須通過課堂之作業、測驗、討論、實驗或成果發表等教學活動規定,經授課教師認證,該修課結果通過或不通過。
📌 微學分完修證明該如何申請?
請至該門課程的E3公告區查詢申請表單連結,並詳細閱讀相關規定。
📌 修課結果會直接出現在成績單上嗎?
不會!請同學必須於畢業當學期統一提出抵免申請。請至ICT選課系統上【匯出學分登錄表】,經系所認計及各單位簽核完成後,才會出現在成績單上。
📌 申請完修證明就表示匯出學分了嗎?
不是!兩者是分開的,完修證明是授課教師給了成績,創創這邊確認同學【通過】課程後,就會在兩周內寄出。而學分登錄表,則是需要同學自己到系統上下載的唷。